Accessoires fournis
- 1x regenhoes
- 1x 5V 3.0A AC Adapter > USB-C
- 1x USB C - USB C cable
- 1x SD card 64GB 95MB/s
- 1x Sound Devices MX-Lmount
- 4x NP-F550 battery
- 2x Sony NP-F battery charger
- 1x Sound Devices MixPre-3 II Audio Recorder/Mixer - Bag
- 1x (Micro-)SD / CF Cardreader + USB cable
Top specs
- Field Recording, Filmmaking & Podcasting
- 32-Bit Recording / 32-Bit USB Streaming
- Record up to 192 kHz, Stream to 96 kHz
- 3 x High-Gain, Low-Noise Mic Preamps
- Records 3 Inputs & Stereo Mix
- Internal Timecode Generator
- Adjustable Analog Limiters
Le Sound Devices MixPre-3 II est un enregistreur de terrain. Avec cet enregistreur, vous pourrez connecter et enregistrer jusqu'à trois microphones externes ainsi qu'enregistrer un mixage stéréo jusqu'à 32 bits/192 kHz.
Avec une profondeur de bits maximale de 32 bits, vous aurez une grande liberté en termes d'édition du son en post-production. Chacun des trois canaux peut être contrôlé et réglé individuellement à l'aide des boutons rotatifs physiques. De plus, l'enregistreur possède un générateur de timecode interne, ainsi que des contrôles de polarité, de coupe-bas et de panoramique. En plus de l'enregistrement avec une carte SD, vous pouvez également effectuer un enregistrement de sauvegarde via une clé USB.
L'enregistreur peut être alimenté par les 4 piles AA fournies ou par le secteur. Enfin, l'enregistreur ne pèse que 0,5 kg (sans les piles) et mesure 144 x 36 x 110 mm.
Sound Devices MixPre-3 II Specs
Portable Recorder
Number of Tracks | WAV: 5 (3 Inputs + Stereo Mix) |
Max Sample Rate/Resolution | 192 kHz / 32-Bit |
Microphone | None |
Built-In Speaker | None |
Display | 1.6" / 40.64 mm Color LCD Touchscreen |
Memory Card Support | SD, SDHC, SDXC (Up to 512 GB) |
Internal Storage | None |
Recording
Audio File Formats | Recording: WAV |
Sample Rates | WAV: 44.1 / 47.952 / 48 / 48.048 / 96 / 192 kHz |
Bit Depth | 16 / 24 / 32-Bit (A/D Conversion) |
Signal Processing | Delay, Limiter, Low-Cut Filter |
Timecode | Yes |
Frame Rates Supported | 23.976 / 24 / 25 / 29.97 / 29.97 DF / 30 / 30 DF |
Clock Accuracy | ±2 ppm / 0.5 Frame per 24 Hrs (Timecode) |
Connectivity
Analog I/O | 3 x XLR 3-Pin Female Balanced Line/Mic Input 1 x 1/8" / 3.5 mm TRS Female Unbalanced Aux Input 1 x 1/8" / 3.5 mm TRS Female Unbalanced Headphone Output 1 x 1/8" / 3.5 mm TRS Female Unbalanced Line Output |
Digital I/O | 1 x 1/8" / 3.5 mm SMPTE Timecode Input 1 x 1/8" / 3.5 mm SMPTE Timecode Output 1 x HDMI Type-D SMPTE Timecode Input |
Phantom Power | +48 V, Selectable On/Off |
Phantom Power Current | 10 mA per Channel |
Plug-In Power | Yes, 3 V |
Host Connection | 1 x USB Type-C (USB 2.0) 1 x USB Type-A (Control, Text Entry, Thumb Drive) |
Bluetooth | Bluetooth 4.0 (Remote) |
Performance
Frequency Response | WAV: 10 Hz to 80 kHz ±0.5 dB (At 192 kHz) |
Gain Range | Mic Inputs: +6 dB to +76 dB Line Inputs: -20 dB to +30 dB Mic/Aux Inputs: +10 dB to +40 dB Line/Aux Inputs: -10 dB to +20 dB Fader: Up to +20 dB Headphone Outputs: Up to +20 dB |
Max Input Level | Mic Inputs: +14 dBu Line Inputs: +28 dBu Mic/Aux Inputs: -10 dBu Line/Aux Inputs: +10 dBu |
Max Output Level | Outputs: +7.8 dBu |
Headphone Output Power | 300 mW per Channel |
Dynamic Range | A/D Converters: 142 dB |
Impedance | Mic/Line Inputs: 4 Kilohms (Active-Balanced, Line Level, Mic Level) Mic/Aux Inputs: 100 Kilohms (Mic Level, Unbalanced) Timecode Input: 20 Kilohms Timecode Output: 1 Kilohms |
THD+N | Inputs: -10 dBu (0.005%) |
EIN | -128 dBu (A-Weighted) |
Power
Power Options | Batteries, USB Bus Power, AC/DC Power Adapter |
Battery Type | 4 x AA (Included) 2 x L Series (Requires Optional Equipment, Hot-Swappable, Not Included) |
AC/DC Power Adapter | 5 VDC (Included) |
AC Input Power | 100 to 240 VAC, 50 / 60 Hz |
Physical
Mounting Options | 1/4"-20 Male (Top) 1/4"-20 Female (Bottom) |
Operating Temperature | -4 to 140°F / -20 to 60°C |
Storage Temperature | -40 to 185°F / -40 to 85°C |
Operating Humidity | 0 to 90% |
Dimensions | 5.7 x 1.4 x 4.3" / 144 x 36 x 110 mm |
Weight | 16.8 oz / 0.5 kg (Without Batteries) |