Le Sound Devices 633 est un mixeur / enregistreur combiné compact et léger. Il est doté de six entrées analogiques dont 3 sont des entrées XLR (avec l'option d'alimentation fantôme) et 3 sont des entrées TA3 de niveau ligne. Il peut enregistrer simultanément sur une carte SD, une carte CompactFlash ou les deux en mono ou poly formats WAV ou MP3. Le Sound Devices 633 est en fibre de carbone et en métal, pèse 1100 g et il est livré dans un sac de mixage avec des câbles. La plage dynamique est de 114 dB. L'enregistreur atteint 24-bit 192.000 Hz en WAV. Il mesure 6,0 x 24 x 14 cm.

Accessoires fournis

6x AA batteries
4x Sony NP-F970 battery
1x Sony NP-F battery charger
1x Multikabel A (MCLSSD5MJ) - 2x Female XLR + Jack naar 10-pin
1x Timecode IN/OUT 5 pin > 2x BNC kabel
1x SD card 32GB 80MB/s
1x regenhoes
1x Sound Devices 633 - bag
1x CF card 32GB 90MB/s
1x Multicable B (MCLSSD5MJ) - 2x Male XLR + Jack to 10-pin
1x (Micro-)SD / CF Cardreader + USB cable

Top specs

Three High-Bandwidth XLR Preamplifiers
+12, +48, and +10V Digital Phantom Power
HP Filter, Pan, Fader, Trim Controls
AES3 and AES42 for Digital Microphones
Digital Mixing

Connectors

3 x XLR 3-pin Female Inputs
3 x TA3 (mini-XLR) inputs
2 x XLR 3-pin male outputs (left and right)
1 x 1/4" headphone jack
2 x TA3 outputs (Aux 1 and Aux 2)
1 x 1/8" stereo output (Aux 3 and Aux 4)
1 x RTN output
1 x Timecode output
1 x 4-pin Hirose power connector

Inputs
Frequency Response	10 to 40,000 Hz ±0.5 dB -3 dB at 65,000 Hz (192,000 Hz sampling rate reference at 1,000 Hz)
THD + Noise	0.09% max (1,000 Hz, 22 to 22,000 Hz BW, fader at 0, 0 dBu output)
Equivalent Input Noise	-126 dBu (-128 dBV) maximum (22 to 22,000 Hz bandwidth, flat filter, trim control fully up)
Input Type	XLR Mic: active balanced for use with ≤600 Ω microphones, 4,000 Ω actual, 12 V or 48 V phantom power, 10 mA max XLR AES: AES3 or AES42 (10 V power), SRC XLR Line: active-balanced for use with ≤2,000 Ω outputs, 10,000 Ω TA3 Line: active-balanced for use with ≤ 2,000 Ω outputs, 10,000 Ω actual RTN (3.5 mm): unbalanced stereo for use with ≤ 2,000 Ω outputs, 30,000 Ω actual
Maximum Input Level	XLR Mic: 0 dBu (0.78 Vrms) XLR Line: +40 dBu (80 Vrms) RTN (3.5 mm): +24 dBu (12.4 Vrms)
Maximum Gain	Mic-In-to-Line-Out: 91 dB Mic-In-to-Aux-Out, -10 Out: 77 dB Line-In-to-Line-Out: 39 dB
High-Pass Filter	Sweepable 80 to 240 Hz 12 dB/octave at 80 Hz 6 dB/octave at 240 Hz
Microphone Power	Each analog input is selectable 12 V phantom through 680 Ω resistors, 10 mA per mic available 48 V phantom through 6,800 Ω, 10 mA per mic available
Limiting	Analog input limiters (inputs 1 through 3) Affects microphone preamp output only (Trim stage): +16 dBu Ratio: 20:1 Attack time: 1 ms Release time: 500 ms Digital input limiters (inputs 1 through 6) Post-fader +6 dBu to +18 dBu threshold (adjustable Ratio: 20:1 Attack time: 1 ms Release time: 500 ms
AES	AES42 Mode 1: provides +10 V digital phantom power

Outputs
Output Type	XLR Line: active balanced for use with ≥ 600 Ω inputs XLR -10: active balanced for use with ≥ 10,000 Ω inputs XLR Mic: active balanced for use with ≥ 600 Ω inputs TA3 Active balanced Mic/Line: pin-2 and 3 driven, for use with ≥ 3,000 Ω inputs Aux X3 and X4 (3.5 mm): unbalanced, stereo, for use with ≥ 6,000 Ω inputs Headphones (1/4"): unbalanced, stereo, for use with 8 to 2,000 Ω headphones
Output Impedance	XLR and TA3 balanced outputs: 100 Ω at line setting 3,200 Ω at -10 setting 150 Ω at mic setting TA3 balanced outs: 1,000 Ω at Mic and line settings Aux X3, X4 (3.5 mm): 100 Ω Headphones (1/4"): 100 Ω
Line Output Level	Clipping: 20 dBu minimum with 10,000 Ω load
Maximum Output Level	Line: +20 dBu (7.8 Vrms) -10: +6 dBu (1.5 Vrms) Mic: -20 dBu (0.078 Vrms) Aux 3/4: +6 dBu (1.5 Vrms)
Limiting	Affects the outputs of the mixer Threshold selectable from +4 dBu to +18 dBu, 1 dB steps Ratio: 20:1 Attack time: 1 ms Release time: 500 ms
Maximum Gain	Typical: Trim, Fader, Master, Phones, RTN fully up Mic-level input Master outs (XLR) at line: 91 dB Master outs (XLR) at -10: 77 dB Master outs (XLR) at mic: 51 dB X3, X4 Outs (3.5 mm): 77 dB Headphones (1/4"): 107 dB Line-level input Master outs (XLR) at line: 51 dB Master outs (XLR) at -10: 37 dB Master outs (XLR) at mic: 11 dB X3, X4 Outs (3.5 mm): 37 dB Headphones (1/4"): 67 dB RTN Headphones (1/4"): 5 dB
AES3 Output	Transformer-balanced AES Out A, B, on XLR 110 Ω, 2 V p-p AES and S/PDIF compatible with RCA adaptor
Sampling Frequency	44,100 Hz 47,952 Hz 48,000 Hz 48,048 Hz 88,200 Hz 96,000 Hz 192,000 Hz
Bit Depth	24-bit
Dynamic Range	114 dB, A-weighted, typical
Recording storage	SD, SDXC, SDHC card Please see manufacturer's site for a list of approved cards FAT32 or exFAT formatted, will format media on-board CompactFlash (CF) FAT32 formatted for CF and SD < 32 GB exFat for SD cards > 32 GB Formats cards in-unit
File Type	Record: WAV (Broadcast Wave File format), polyphonic or MP3 Playback: WAV (Broadcast Wave File format), polyphonic or MP3
Timecode	Modes supported: Off, Rec Run, Free Run, 24h Run, External Frame Rates: 23.976, 24, 25, 29.97DF, 29.97ND, 30DF, 30ND Accuracy: Ambient generator, 0.2 ppm (0.5 frame in 24 hr) Timecode input: 20,000 Ω impedance, 0.3 V to 3.0 V p-p (-17 dBu to +3 dBu) Timecode output: 1,000 Ω impedance, 3.0 V p-p (+12 dBu)
Accuracy	Sample/Timecode: ± 0.2 ppm (0.5 frames per 24 hours)
Power	External: 10 to 18 V on locking 4-pin Hirose connector, pin 4 = +, pin 1 = - 2 x Removable 7.2 V (nominal) Sony L-type Li-ion, operational from 6.5 to 8.5 V Internal 6 x AA (LR6) batteries, 1.2 to 1.6 V nominal (NiMH rechargeable compatible)
Temperature	Operating: -4 to 140° F (-20 to 60° C) Storage: -40 to 185° F (-40 to 85°C)
Humidity (Non-condensing)	0 to 90% relative humidity
Dimensions (H x W x D)	2.2 x 9.4 x 5.6" (6.0 x 24 x 14 cm)
Weight	2.56 lb (1.10 kg)

Téléchargements

Sound devices 633 manual en

Sound Devices 633 mixeur / enregistreur audio

Accessoires fournis

6x AA batteries
4x Sony NP-F970 battery
1x Sony NP-F battery charger
1x Multikabel A (MCLSSD5MJ) - 2x Female XLR + Jack naar 10-pin
1x Timecode IN/OUT 5 pin > 2x BNC kabel
1x SD card 32GB 80MB/s
1x regenhoes
1x Sound Devices 633 - bag
1x CF card 32GB 90MB/s
1x Multicable B (MCLSSD5MJ) - 2x Male XLR + Jack to 10-pin
1x (Micro-)SD / CF Cardreader + USB cable

Top specs

Three High-Bandwidth XLR Preamplifiers
+12, +48, and +10V Digital Phantom Power
HP Filter, Pan, Fader, Trim Controls
AES3 and AES42 for Digital Microphones
Digital Mixing

Connectors

Inputs
Frequency Response	10 to 40,000 Hz ±0.5 dB -3 dB at 65,000 Hz (192,000 Hz sampling rate reference at 1,000 Hz)
THD + Noise	0.09% max (1,000 Hz, 22 to 22,000 Hz BW, fader at 0, 0 dBu output)
Equivalent Input Noise	-126 dBu (-128 dBV) maximum (22 to 22,000 Hz bandwidth, flat filter, trim control fully up)
Input Type	XLR Mic: active balanced for use with ≤600 Ω microphones, 4,000 Ω actual, 12 V or 48 V phantom power, 10 mA max XLR AES: AES3 or AES42 (10 V power), SRC XLR Line: active-balanced for use with ≤2,000 Ω outputs, 10,000 Ω TA3 Line: active-balanced for use with ≤ 2,000 Ω outputs, 10,000 Ω actual RTN (3.5 mm): unbalanced stereo for use with ≤ 2,000 Ω outputs, 30,000 Ω actual
Maximum Input Level	XLR Mic: 0 dBu (0.78 Vrms) XLR Line: +40 dBu (80 Vrms) RTN (3.5 mm): +24 dBu (12.4 Vrms)
Maximum Gain	Mic-In-to-Line-Out: 91 dB Mic-In-to-Aux-Out, -10 Out: 77 dB Line-In-to-Line-Out: 39 dB
High-Pass Filter	Sweepable 80 to 240 Hz 12 dB/octave at 80 Hz 6 dB/octave at 240 Hz
Microphone Power	Each analog input is selectable 12 V phantom through 680 Ω resistors, 10 mA per mic available 48 V phantom through 6,800 Ω, 10 mA per mic available
Limiting	Analog input limiters (inputs 1 through 3) Affects microphone preamp output only (Trim stage): +16 dBu Ratio: 20:1 Attack time: 1 ms Release time: 500 ms Digital input limiters (inputs 1 through 6) Post-fader +6 dBu to +18 dBu threshold (adjustable Ratio: 20:1 Attack time: 1 ms Release time: 500 ms
AES	AES42 Mode 1: provides +10 V digital phantom power

Outputs
Output Type	XLR Line: active balanced for use with ≥ 600 Ω inputs XLR -10: active balanced for use with ≥ 10,000 Ω inputs XLR Mic: active balanced for use with ≥ 600 Ω inputs TA3 Active balanced Mic/Line: pin-2 and 3 driven, for use with ≥ 3,000 Ω inputs Aux X3 and X4 (3.5 mm): unbalanced, stereo, for use with ≥ 6,000 Ω inputs Headphones (1/4"): unbalanced, stereo, for use with 8 to 2,000 Ω headphones
Output Impedance	XLR and TA3 balanced outputs: 100 Ω at line setting 3,200 Ω at -10 setting 150 Ω at mic setting TA3 balanced outs: 1,000 Ω at Mic and line settings Aux X3, X4 (3.5 mm): 100 Ω Headphones (1/4"): 100 Ω
Line Output Level	Clipping: 20 dBu minimum with 10,000 Ω load
Maximum Output Level	Line: +20 dBu (7.8 Vrms) -10: +6 dBu (1.5 Vrms) Mic: -20 dBu (0.078 Vrms) Aux 3/4: +6 dBu (1.5 Vrms)
Limiting	Affects the outputs of the mixer Threshold selectable from +4 dBu to +18 dBu, 1 dB steps Ratio: 20:1 Attack time: 1 ms Release time: 500 ms
Maximum Gain	Typical: Trim, Fader, Master, Phones, RTN fully up Mic-level input Master outs (XLR) at line: 91 dB Master outs (XLR) at -10: 77 dB Master outs (XLR) at mic: 51 dB X3, X4 Outs (3.5 mm): 77 dB Headphones (1/4"): 107 dB Line-level input Master outs (XLR) at line: 51 dB Master outs (XLR) at -10: 37 dB Master outs (XLR) at mic: 11 dB X3, X4 Outs (3.5 mm): 37 dB Headphones (1/4"): 67 dB RTN Headphones (1/4"): 5 dB
AES3 Output	Transformer-balanced AES Out A, B, on XLR 110 Ω, 2 V p-p AES and S/PDIF compatible with RCA adaptor
Sampling Frequency	44,100 Hz 47,952 Hz 48,000 Hz 48,048 Hz 88,200 Hz 96,000 Hz 192,000 Hz
Bit Depth	24-bit
Dynamic Range	114 dB, A-weighted, typical
Recording storage	SD, SDXC, SDHC card Please see manufacturer's site for a list of approved cards FAT32 or exFAT formatted, will format media on-board CompactFlash (CF) FAT32 formatted for CF and SD < 32 GB exFat for SD cards > 32 GB Formats cards in-unit
File Type	Record: WAV (Broadcast Wave File format), polyphonic or MP3 Playback: WAV (Broadcast Wave File format), polyphonic or MP3
Timecode	Modes supported: Off, Rec Run, Free Run, 24h Run, External Frame Rates: 23.976, 24, 25, 29.97DF, 29.97ND, 30DF, 30ND Accuracy: Ambient generator, 0.2 ppm (0.5 frame in 24 hr) Timecode input: 20,000 Ω impedance, 0.3 V to 3.0 V p-p (-17 dBu to +3 dBu) Timecode output: 1,000 Ω impedance, 3.0 V p-p (+12 dBu)
Accuracy	Sample/Timecode: ± 0.2 ppm (0.5 frames per 24 hours)
Power	External: 10 to 18 V on locking 4-pin Hirose connector, pin 4 = +, pin 1 = - 2 x Removable 7.2 V (nominal) Sony L-type Li-ion, operational from 6.5 to 8.5 V Internal 6 x AA (LR6) batteries, 1.2 to 1.6 V nominal (NiMH rechargeable compatible)
Temperature	Operating: -4 to 140° F (-20 to 60° C) Storage: -40 to 185° F (-40 to 85°C)
Humidity (Non-condensing)	0 to 90% relative humidity
Dimensions (H x W x D)	2.2 x 9.4 x 5.6" (6.0 x 24 x 14 cm)
Weight	2.56 lb (1.10 kg)