Accessoires fournis

1x Teradek Bolt XT 500 RX HDMI/SDI Receiver
1x Teradek Bolt XT 500 TX HDMI/SDI Transmitter
2x Teradek battery plate
1x 2 pin LEMO > D-Tap cable
1x 3/8" - 1/4" reducing screw
1x Sony NP-F battery charger
4x Sony NP-F750/NP-F770 battery
2x Antenna
1x Hotshoe Mount whith screw
2x HDMI cable 1 meter
2x SDI cable 1 meter

Top specs

Supports up to 1080p60 Resolution
Backward Compatible with Select Systems
3G-SDI and HDMI Inputs/Outputs
Cross Conversion

Avec le Teradek Bolt 500 XT 3G-SDI/HDMI, vous pourrez immédiatement commencer à transmettre un signal 1080p60 à partir d'une source SDI ou HDMI. L'émetteur et le récepteur à latence zéro ont une distance de transmission de 152 mètres en ligne de site. Vous pouvez envoyer et recevoir des signaux vidéo 3G sans perte visuelle à partir d'un émetteur Bolt 500 sans latence. L'émetteur a une conversion croisée, vous pourrez donc connecter votre caméra SDI à un moniteur HDMI.

Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter Specs

Construction	Milled Aluminum Chassis and Regulation-Compliant PCB
Video Inputs	SDI: 1 x BNC (75 Ohm), 3G/HD/SD HDMI: 1 x HDMI Type A Receptacle
Video Outputs	SDI: 1 x BNC (75 Ohm), 3G/HD/SD, Loop-Through
Color Sampling	SDI: YCbCr 4:2:2, 10-bit (8-Bit when Format Conversion is Enabled) HDMI: RGB 4:4:4, 8-Bit
Latency	<0.001 Seconds (TX to RX without Format Conversion)
Supported Resolutions	1080p: 60/59.94/50/30/29.97/25/24/23.98 1080PsF: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 480i: 59.94 576i: 50
Video Processing	Compression Visually Lossless Color Correction CDL/1024 1D LUT (Supports 10-Bit Color) 33x33x33 3D LUT (Supports 10-Bit Color)
Audio Compression	48 kHz, 24-bit PCM
Audio Input	Embedded
Interfaces	Switches: On/Off and Reset Desktop App: Feature-Rich Bolt Manager Application for OS X and Windows USB Interface Functionality: Upgrade via Mini-USB
Wireless	Non-DFS Frequencies UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz EU & JP: 5.19 to 5.23 GHz DFS Frequencies US: 5.27 to 5.55 GHz and 5.67 GHz EU & JP: 5.27 to 5.67 GHz
RF Power	17 dBm EIRP
Encryption	AES-128
Range	Up to 500' / 152.4 m Line of Sight
Unicast Multicast	Unicast / Multicast
Noise Rejection	Can Coexist with Wi-Fi and 5 GHz Cordless Phones
Power Input	2-Pin Connector 7 to 17 VDC
Power Consumption	Nominal 7.3 W (Measured at 1080p60)
Operating Temperature	32 to 104°F / 0 to 40°C
Mountable	1 x 1/4"-20 Threaded Mounting Hole 2 x M3 Threaded Mounting Holes
Dimensions	0.95 x 2.6 x 4.47" / 2.41 x 6.6 x 11.35 cm
Weight	8 oz / 226 g

Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Receiver Specs

Construction	Milled aluminum Chassis and Regulation-Compliant PCB
Video Outputs	SDI: 2 x BNC (75 Ohm), 3G/HD/SD HDMI: 1 x HDMI Type A Receptacle USB: 1 x USB Type 3.0 Micro-B Receptacle
Color Sampling	SDI: YCbCr 4:2:2, 10-Bit (8-Bit when Format Conversion is Enabled) HDMI: RGB 4:4:4, 8-Bit
Latency	<0.001 Seconds (TX to RX without Format Conversion)
Supported Resolutions	1080p: 60/59.94/50/30/29.97/25/24/23.98 1080PsF: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 576p: 50 (via HDMI Only) 480p: 59.94 (via HDMI Only) 576i: 50 480i: 59.94
Video Processing	Compression Visually Lossless Color Correction CDL/1024 1D LUT (Supports 10-Bit Color) 33x33x33 3D LUT (Supports 10-Bit Color)
Audio Compression	48 kHz, 24-Bit PCM
Audio Input	Embedded
Interfaces	Switches: On/Off and Reset Desktop App: Feature-Rich Bolt Manager Application for OS X and Windows USB Interface Functionality: Upgrade via Mini-USB
Wireless	Non-DFS Frequencies UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz EU & JP: 5.19 to 5.23 GHz DFS Frequencies US: 5.27 to 5.55 GHz and 5.67 GHz EU & JP: 5.27 to 5.67 GHz
RF Power	15 dBm EIRP
Encryption	AES-128
Range	Up to 500' / 152.4 m Line of Sight
Unicast Multicast	Unicast / Multicast
Noise Rejection	Can Coexist with Wi-Fi and 5 GHz Cordless Phones
Power Input	2-Pin Connector 7 to 28 VDC
Power Consumption	Nominal 9 W (Measured at 1080p60)
Operating Temperature	32 to 104°F / 0 to 40°C
Mountable	1 x 1/4"-20 Threaded Mounting Hole 2 x M3 Threaded Mounting Holes
Dimensions	6 x 3.4 x 1" / 15.24 x 8.64 x 2.54 cm
Weight	10.5 oz / 297.7 g

Téléchargements

Teradek bolt xt 500 sdi:hdmi wireless video transmitter quickguide

Teradek Bolt XT 500 SDI/HDMI Transmetteur Vidéo Sans Fil

Accessoires fournis

1x Teradek Bolt XT 500 RX HDMI/SDI Receiver
1x Teradek Bolt XT 500 TX HDMI/SDI Transmitter
2x Teradek battery plate
1x 2 pin LEMO > D-Tap cable
1x 3/8" - 1/4" reducing screw
1x Sony NP-F battery charger
4x Sony NP-F750/NP-F770 battery
2x Antenna
1x Hotshoe Mount whith screw
2x HDMI cable 1 meter
2x SDI cable 1 meter

Top specs

Supports up to 1080p60 Resolution
Backward Compatible with Select Systems
3G-SDI and HDMI Inputs/Outputs
Cross Conversion

Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter Specs

Construction	Milled Aluminum Chassis and Regulation-Compliant PCB
Video Inputs	SDI: 1 x BNC (75 Ohm), 3G/HD/SD HDMI: 1 x HDMI Type A Receptacle
Video Outputs	SDI: 1 x BNC (75 Ohm), 3G/HD/SD, Loop-Through
Color Sampling	SDI: YCbCr 4:2:2, 10-bit (8-Bit when Format Conversion is Enabled) HDMI: RGB 4:4:4, 8-Bit
Latency	<0.001 Seconds (TX to RX without Format Conversion)
Supported Resolutions	1080p: 60/59.94/50/30/29.97/25/24/23.98 1080PsF: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 480i: 59.94 576i: 50
Video Processing	Compression Visually Lossless Color Correction CDL/1024 1D LUT (Supports 10-Bit Color) 33x33x33 3D LUT (Supports 10-Bit Color)
Audio Compression	48 kHz, 24-bit PCM
Audio Input	Embedded
Interfaces	Switches: On/Off and Reset Desktop App: Feature-Rich Bolt Manager Application for OS X and Windows USB Interface Functionality: Upgrade via Mini-USB
Wireless	Non-DFS Frequencies UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz EU & JP: 5.19 to 5.23 GHz DFS Frequencies US: 5.27 to 5.55 GHz and 5.67 GHz EU & JP: 5.27 to 5.67 GHz
RF Power	17 dBm EIRP
Encryption	AES-128
Range	Up to 500' / 152.4 m Line of Sight
Unicast Multicast	Unicast / Multicast
Noise Rejection	Can Coexist with Wi-Fi and 5 GHz Cordless Phones
Power Input	2-Pin Connector 7 to 17 VDC
Power Consumption	Nominal 7.3 W (Measured at 1080p60)
Operating Temperature	32 to 104°F / 0 to 40°C
Mountable	1 x 1/4"-20 Threaded Mounting Hole 2 x M3 Threaded Mounting Holes
Dimensions	0.95 x 2.6 x 4.47" / 2.41 x 6.6 x 11.35 cm
Weight	8 oz / 226 g

Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Receiver Specs

Construction	Milled aluminum Chassis and Regulation-Compliant PCB
Video Outputs	SDI: 2 x BNC (75 Ohm), 3G/HD/SD HDMI: 1 x HDMI Type A Receptacle USB: 1 x USB Type 3.0 Micro-B Receptacle
Color Sampling	SDI: YCbCr 4:2:2, 10-Bit (8-Bit when Format Conversion is Enabled) HDMI: RGB 4:4:4, 8-Bit
Latency	<0.001 Seconds (TX to RX without Format Conversion)
Supported Resolutions	1080p: 60/59.94/50/30/29.97/25/24/23.98 1080PsF: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 576p: 50 (via HDMI Only) 480p: 59.94 (via HDMI Only) 576i: 50 480i: 59.94
Video Processing	Compression Visually Lossless Color Correction CDL/1024 1D LUT (Supports 10-Bit Color) 33x33x33 3D LUT (Supports 10-Bit Color)
Audio Compression	48 kHz, 24-Bit PCM
Audio Input	Embedded
Interfaces	Switches: On/Off and Reset Desktop App: Feature-Rich Bolt Manager Application for OS X and Windows USB Interface Functionality: Upgrade via Mini-USB
Wireless	Non-DFS Frequencies UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz EU & JP: 5.19 to 5.23 GHz DFS Frequencies US: 5.27 to 5.55 GHz and 5.67 GHz EU & JP: 5.27 to 5.67 GHz
RF Power	15 dBm EIRP
Encryption	AES-128
Range	Up to 500' / 152.4 m Line of Sight
Unicast Multicast	Unicast / Multicast
Noise Rejection	Can Coexist with Wi-Fi and 5 GHz Cordless Phones
Power Input	2-Pin Connector 7 to 28 VDC
Power Consumption	Nominal 9 W (Measured at 1080p60)
Operating Temperature	32 to 104°F / 0 to 40°C
Mountable	1 x 1/4"-20 Threaded Mounting Hole 2 x M3 Threaded Mounting Holes
Dimensions	6 x 3.4 x 1" / 15.24 x 8.64 x 2.54 cm
Weight	10.5 oz / 297.7 g