Supplied accessories
- 1x Rode Blimp
- 1x Rode DeadWombat
- 1x Rode NTG3B microphone
- 1x RØDE NTG3B - Bag
Top specs
- For Indie Films, TV & Documentaries
- Moisture-Resistant for Humid Conditions
- Phantom Powered
- Enhanced Immunity to RF Interference
- Frequency Range 40Hz to 20kHz
The Rode NTG3B Moisture-Resistant Shotgun Microphone incl Blimp is a condensator directional microphone. Its wide frequency range of 40 Hz to 20.9 kHz and flat curve result in a natural, full sound. You connect the microphone with an XLR cable. It operates on phantom power. The microphone comes with the Rode blimp. The built-in shock mount minimizes any movement and grip sounds. The NTG3B is a Super Cardioid microphone. Its dynamic range is 17 dB. It weighs 163 g. Its dimensions are ø: 19 x L: 255mm. Attention! This set does not include a boom pole.
Rode NTG3 Specs
Microphone
| Form Factor |
Stand/Boom Mount |
| Sound Field |
Mono |
| Operating Principle |
Line Gradient |
| Capsule |
Condenser |
| Diaphragm |
0.5" / 12.70 mm |
| Polar Pattern |
Supercardioid |
| Orientation |
End Address |
| Circuitry |
Solid-State |
| Pad |
None |
| High-Pass Filter |
None |
| Tone Adjustment |
None |
| Indicators |
None |
| On-Board Controls |
None |
| Windscreen |
Foam (Included) |
Performance
| Frequency Range |
40 Hz to 20 kHz |
| Maximum SPL |
130 dB SPL (1 kHz, 1% THD, 1-Kilohm Load) |
| Off-Axis Rejection |
8 dB at 60°
18 dB at 120°
17 dB at 180° |
| Impedance |
25 Ohms |
| Sensitivity |
-30 dBV/Pa at 1 kHz |
| Output Level |
8.2 mV (Max) |
| Dynamic Range |
117 dB |
| Signal-to-Noise Ratio |
81 dB A-Weighted |
| Equivalent Noise Level |
13 dB A-Weighted |
Connectivity
| Output Connectors (Analog) |
1 x XLR 3-Pin |
Power
| Operating Voltage |
48 V ± 4 V |
| Operating Current Consumption |
5 mA |
Physical
| Color |
Black |
| Mounting |
3/8"-16 Female, 5/8"-27 Female, Mic Clip (with Included Hardware) |
| Construction Material |
Brass |
| Dimensions |
ø: 0.75 x L: 10.04" / ø: 19 x L: 255 mm |
| Weight |
5.75 oz / 163 g (Microphone) |
